5674
Three-Way Screen
Channel System


|

Three-Way Screen Channel System
The 5674 system is designed for critical film sound reproduction for large theater environments (up to 1200 seats)

FEATURES
  • Three-way system design for maximum output with minimum distortion
  • Optimized Aperture Bi-Radial® and driver technology for ultra-low distortion
  • Midrange pattern control for increased direct vs. reverberant energy
  • Vented Gap Cooled (VGC™) LF transducer(s) for maximum output and reliability
  • Flat-front design for easy baffle wall installation
  • Fully adjustable horn bracket for precise directional control

SPECIFICATIONS
Frequency Range 35 Hz to 16 kHz (-10 dB)
Frequency Response 45 Hz to 12.5 kHz
(+/- 3 dB)
Horizontal Coverage Angle 80°, averaged 300 Hz to
16 kHz (-6dB)
Vertical Coverage Angle 45°, averaged 300 Hz to 16 kHz (-6 dB)
Maximum Output 117 dB-SPL @ 10 m
Recommended Crossover Frequency LF/MF: 297 Hz, MF/HF: 2.5 kHz
Low Frequency Four 2226 H 380 mm (15 in) dia., 100
mm (4 in) edgewound ribbon voice coil
One 5504 LF enclosure with Diamond
Quad driver array
Nominal Impedance Each pair in parallel; two 4 Ohm loads
per driver pair
Input Power Rating 2400 W, AES; two channels of
1200 W Recommended Amplifier
per driver pair
Sensitivity 103 dB, 1 W @ 1 m (3.3 ft)
Input Connectors Barrier Strip
Mid Frequency 2392 midrange horn 2490 H midrange
driver; 100 mm (4in) edgewound
ribbon voice coil
Nominal Impedance 8 Ohms
Input Power Rating 200 W, AES; 300 W
Recommended Amplifier
Sensitivity 115 dB, 1 W @ 1 m (3.3 ft)
High Frequency 2352 Horn 2451 driver; 100mm (4in)
edgewound ribbon voice coil
Nominal Impedance 8 Ohms
Input Power Rating 75 W, AES; 200 W
Recommended Amplifier
Sensitivity 112 dB, 1 W @ 1 m (3.3 ft)
Mounting Accessories F horn baffle board and
mounting frame which couples
MF and HF; mounts to LF enclosure
or aiming/tilting
Dimensions (H x W x D) 2895.6 x 1118 x 812.8mm
(114 x 44 x 32in)
Net Weight 171.69 kg (378.5 lb)

SPEC SHEETS (PDF)