|
VTX ACCESSORIES

The V25 Angle Stop Mechanism (ASM) suspension system and dolly board accessories were initially designed as incremental improvements to the VERTEC suspension system to facilitate more rapid caterpillar-style suspension (with V25 enclosures transported face-down on dolley boards) for fixed angle tension mode.

Due to a high level of demand from the field for vertical transporter system conditioning and deployment, JBL Professional is pleased to introduce a new optional compression-style suspension kit and accessories for VTX V25.

By leveraging design features of the highly-effective VTX V20 ASM suspension system, comparable ease-of-use and deployment speed are now available for V25-CS-K equipped enclosures.

To retrofit enclosures, one VTX-V25-CS-K Compression Suspension Kit is required per VTX V25 enclosure. At least one VTX-V25-CS-K-LJ label jig installation fixture should be ordered with each VTX-V25-CS-K order. Detailed label application instructions are included with the label jig. The entire process to install VTX-V25-CS-K and convert one V25 cabinet to compression suspension can be completed in approximately 10 minutes.

  • Ideal for vertical transporter use
  • Rapid, secure, precise installation
  • Improved long throw resolution
  • Optimum truck pack dimensions
  • Convenient retrofit for existing V25 enclosures from fixed angle tension to compression mode

VTX-V20-DF DOWNFILL ADPATER

Designed to facilitate fast attachment and precise alignment of VTX V20 and V25-II / V25-II-CS systems, the VTX V20-DF is a lightweight solution for providing wider coverage at the bottom of VTX V25-II / V25-II-CS arrays.

Features
  • Lightweight design with multiple options for angle between V25-II / V25-II-CS and V20. (3.5deg, 7.5deg, 11deg)
  • Able to be used as a downfill adapter frame for V25-II arrays, or as a downfill adapter frame + pullback frame for compression of VTX V25-II-CS arrays with V20 downfill
  • Supports up to 6x VTX V20 cabinets suspended underneath VTX V25-II / V25-II-CS

IMAGES
DOCUMENTATION
VTX-V25-CS-K COMPRESSION SUSPENSION KIT

Compression suspension can be implemented on existing VTX V25 cabinets equipped with the new VTX-V25-CS-K compression suspension kit using VTX-V25-PB Pull Back, VTX-V25-LH Lever Hoist accessories.

The kit includes: 
  • 2x Suspension frame labels
  • 2x Slot hinge bars
  • 2x ASM bars
  • 2x Quick Release Pin (QRP) / lanyard assemblies and all required mount hardware

IMAGES
DOCUMENTATION
VTX-V25-CS-K-LJ LABEL KIT

Compression Suspension Kit Label Jig to ensure proper placement, alignment and adhesion when installing labels.

The kit includes: 
  • 2 spare labels
  • Label jig installation fixture
  • Detailed instructions (see documentation download)
    NOTE: At least one label jig installation fixture should be ordered
    per VTX-V25-CS-K order

IMAGES
DOCUMENTATION
VTX-V25-PB PULL BACK ACCESSORY

Pull Back accessory for attachment to bottom V25 enclosure to facilitate compression suspension of VTX-V25-CS-K equipped arrays. Includes all parts needed to properly compress a VTX V25 array equipped with the VTX-V25-CS-K compression suspension kit.
  • Spreader bar with integrated attachment brackets
  • Master link
  • Shackles and dual leg chain bridle with locking safety hooks
  • The only factory-approved device for compression of VTX V25 arrays

IMAGES
DOCUMENTATION
VTX-V25-LH LEVER HOIST

Factory-approved manual lever hoist for compression of VTX-V25-CS-K equipped systems. The CM Series 653 for use with VTX V25 is a 1 ½ ton model with 20’ of chain length for compressing arrays of up to 18 cabinets with no additional extension hardware needed.
  • Lever Hoist (1 ½ ton rating) for use with VTX-V25-PB
  • For compression of VTX-V25-CS-K equipped arrays

IMAGES
DOCUMENTATION
VTX-V25-VTC VERTICAL TRANSPORTER

With design features similar to VTX-V20-VT, the VTX-V25-VTC is a simple and cost-effective solution for vertically transporting VTX V25-CS enclosures in blocks of 3 or 4 cabinets high. Measuring 48” wide by 25” deep, the VTX-V25-VTC will travel 4 across (length-wise) in standard 100” trailers, and 2 across (width-wise) in standard 96” trucks.
  • Can transport 3x or 4x V25 enclosures high
  • Heavy duty locking casters
  • Stackable
  • Fully compatible with existing VTX-V25-VT-CVR protective covers

IMAGES
DOCUMENTATION
VTX-S28-VTC VERTICAL TRANSPORTER

The VTX-S28-VTC vertical transporter can accommodate 3x S28 enclosures high in either front-firing or cardioid mode and transporters are dimensioned to fit 2 across (width-wise) in standard 96” trucks. The VTX-S28-VTC transporter features heavy duty locking casters and is stackable plus fully compatible with existing VTX-S28-CVR protective covers.
  • Can transport 3x S28 enclosures high in either front-firing or cardioid mode
  • Heavy duty locking casters
  • Stackable
  • Fully compatible with existing VTX-S28-CVR protective covers
  • Optimally-dimensioned to fit in 100” (2.55 m) or 96” (2.44 m) trucks

IMAGES
DOCUMENTATION
VTX-V25-VT-CVR PADDED COVER

Reinforced, padded protective cover for 3x or 4x VTX-V25 enclosures when transported vertically.
  • Handle cutouts
  • Rear panel access flap

IMAGES
DOCUMENTATION
VTX-S28-VT-CVR PADDED COVER

Reinforced, padded protective cover for 3 VTX-S28 enclosures when transported vertically in either front-firing or cardioid mode.
  • Handle cutouts
  • Rear panel access flap

IMAGES
DOCUMENTATION