|
- Dual Differential Drive® woofers
- 1.5" annual polymer diaphragm
compression driver
- Class-D, Crown® digital amplifier
- DSP input section with crossover,
dynamic limiting, component
optimization, selectable system EQ
- Professional XLR line and ¼"
Mic/Instrument inputs with loop through
- Illuminated logo for clear Power-On
status
- DuraFlex™ coated plywood construction
- Polypropylene end-caps enhance
durability
- Wrap around heavy duty steel grille
provides protection without obstructing
performance.
- Large die-cast aluminum handle bar with
a fine tuned ergonomic rubber grip for
maximum comfort
 Applications
:
If a simple set-up is required and full
bandwidth output at high levels is a must,
then the PRX525 is most likely the optimum
solution. With the same foot print as the
PRX515 the addition of another 15" woofer
only increases the weight by 24 lbs, yet the
increase in performance negates the
requirement for an extra subwoofer in live
music and many music playback
applications. For live music, recorded music
playback and speech the user has the
option of tailoring the EQ, 'flat' for speech
intelligibility and 'boost' for enhanced bass
and crisp highs in recorded music playback.
A microphone can be directly connected to
the speaker input for quick on-the-fly PA
applicaitons.
The PRX525 is a self-powered, lightweight
two-way loudspeaker system capable of
delivering a very high level of performance
over a broad bandwidth. The PRX525 is
comprised of two 380 mm (15 in) 265F
Differential Drive® woofers, a 2408H
37.5mm (1.5 in) annular polymer
diaphragm, neodymium compression driver
mounted to a 70° by 70° horn, all driven
by a multi-channel Crown International
Class-D digital power amplifier. A propriety
DSP chip is at the core of a fully featured
input section, providing user selectable
system EQ, protection, input sensitivity
selection, cross-over functionality, dynamic
limiting and discrete component
optimization.
The enclosure is constructed of quality
plywood and coated in JBL’s rugged
DuraFlex™ finish. Durable polypropylene
end-caps add extra protection for the
cabinet. The CNC-machined steel grille
wraps around the sides of the enclosure so
there are no protruding lips on the front of
the box to create acoustical interference.
The grille is also lined with an acoustically
transparent foam to provide additional
driver protection.
The amplifier input panel offers XLR or ¼ inch jack compatibility
and a sensitivity
switch provides extra flexibility, making it possible to connect literally
any sound source
without using a mixer. Signal present and overload lights indicate the
system status and
assist in setting the optimum level, via the level control knob.
|
|
|
|
|
Frequency
Range |
:
|
45 Hz – 20 kHz (EQ in flat position) |
Frequency
Response |
:
|
52 Hz – 20 kHz (EQ in flat position) |
Coverage Pattern: |
:
|
70° x 70° nominal |
System Power Rating: |
:
|
650
W continuous, 1300 W peak |
| Directivity Index (DI) |
:
|
10.3 dB
|
| Directivity Factor (Q):: |
:
|
10.8
|
Dimensions (H x W x D) |
:
|
1300 mm x 440 mm x 465 mm
(51 in x 17.25 in x 18.25 in) |
Weight
|
:
|
38
kg (84 lb) |
High
Frequency Driver |
:
|
1
x JBL 2408H 37.5 mm (1.5 in) annular polymer diaphragm,
neodymium compression driver |
Low
Frequency Driver |
:
|
2 x
JBL 265F 380 mm (15 in) Differential Drive® woofer |
|
