|
|
|
Frequency Range
(± 3 dB) |
: |
75 Hz to 20 kHz
|
Power Capacity |
: |
I75 W
|
Sensitivity) |
: |
89 dB SPL, 1 W, 1 m (3.3 ft)
|
Directivity Factor (Q): |
: |
2.8 |
Directivity Index (DI): |
: |
4.5
|
System Sensitivity
(dB-SPL, 1W @ 1m)
|
: |
30 Hz – 150 Hz:
1 cabinet: 102 dB
2 cabinets: 104 dB
4 cabinets: 107 dB| |
| Nominal Impedance |
|
4 ohms |
| Crossover Frequency |
|
3 kHz |
| Polarity |
|
Positive Voltage to + terminal causes
outward low frequency cone motion, |
| Enclosure Material |
|
Polypropylene structural foam |
| Finish |
|
Black or white |
| Dimensions:: |
|
387 H x 251 W x 229 mm D
15.25 H x 9.875 W x 9 in D |
| Net Weight (each): |
|
4.5 kg (10 lb) |
MTC-51 Wall
Mount Bracket: |
|
Allows the Control 5 to be mounted
to any rigid vertical surface with a
unique polymer ball and clamp
design, In addition to omnidirectional
movement about the ball, the
speaker’s connecting wires may
be run internal to the clamp.
Optional colors. |
MTC-52 Ceiling
Mount Bracket:: |
|
The same as the MTC-51 except that it is designed to be |
| Rack Mount Bracket: |
|
Allows the Control to be
mounted in a standard 19 in EIA
equipment rack, with accommodation
for vertical adjustment. |
| Tripod Mounting Adapter: |
|
Allows the Control 5 to be mounted to the JBLMT4612 aluminum tripod in either a vertical or horizontal position. |
| MTC-56 Wall Mount Bracket: |
|
Low cost, fixed angle wall mount bracket with safety chain, |
| Note:: |
|
Accessory attachment points on
rear of the enclosure are .25 x 20 in
threaded brass bushings, |
AE
:
