Sound Reinforcement Loudspeakers Designed to Impress
Array Series 4892, 4892-90: Two-way Single 355 mm (14”) Full Range System

Array Series 4894, 4894-90: Two-way Dual 355 mm (14”) Full Range System

Array Series 4890, 4891: Two-way Single 355 mm (14”) Stage Monitor

Array Series 4893: Dual 355 mm (14”) Subwoofer
The Array Series of loudspeakers and active system controllers provide high quality sound reinforcement solutions for both installed and live sound projects. The Array series full bandwidth cabinets are fitted with Optimized Aperture Bi-Radial Horns, and neodymium-based 14” cone drivers. Floor monitors and subwoofers round out this complete line of loudspeakers which can be used in Concert Halls, Worship Spaces, Arenas, and almost any application where high quality sound is important. The Array Series is designed to be flown using the S.A.F.E. flying hardware system.

Array Series 4892, 4892-90 4892 Specification Sheet
4892-90 Specification Sheet

Two-way Single 355 mm (14”)
Bi-Amplified System

Frequency Response: 50Hz - 18khz (+/- 3dB)
Recommended Amplifier Power: High Frequency: 300 W at 8 Ohms
Low Frequency: 600 W at 8 Ohms
Sensitivity: 98 dB (1W, 1m)
Nominal Impedance: 8 Ohms
Nominal Coverage: 4892: 45 Horizontal, 35 Vertical
4892-90: 90 Horizontal, 35 Vertical
Power Rating: Low Frequency Transducer:600 W AES, 50 Hz to 500 Hz 2400W peak
High Frequency Transducer: 75 W AES, 1kHz to 10kHz, 300 W peak
Nominal Diameter: Low Frequency Transducer: 355 mm (14”)
Throat Diameter: High Frequency Transducer: 38 mm (1.5” exit)
High Frequency Horn: Type: Optimized Aperture Flat Front Bi-Radial
Enclosure: Flying System: S.A.F.E. - JBL Proprietary, modular, certified
Finish: Black Textured paint
Grille: 16ga. perforated steel, foam backed
Dimensions (HxWxD): 628 x 394 x 362 mm,
(24 3/4 x 15 1/2 x 14 1/4 in)

  Array Series 4894, 4894-10 4894 Specification Sheet
4894-90 Specification Sheet

Two-way Dual 355 mm (14”) Bi-Amplified System
Frequency Response: 46Hz - 18khz (+/- 3dB)
Recommended Amplifier Power: High Frequency: 300 W at 8 Ohms
Low Frequency: 600 W at 8 Ohms each transducer (x2)
Sensitivity: 100 dB (1W, 1m)
Nominal Impedance: Low Frequency: Two transducers with separate pinouts , 8 Ohms each
High Frequency: 8 Ohms
Nominal Coverage: 4894: 45 Horizontal, 35 Vertical
4894-90: 90 Horizontal, 35 Vertical
Power Rating: Low Frequency Transducer:600 W AES, 50 Hz to 500 Hz 2400W peak
High Frequency Transducer: 75 W AES, 1kHz to 10kHz, 300 W peak
Nominal Diameter: Low Frequency Transducer:(Two)355 mm (14”)
Throat Diameter: High Frequency Transducer: 38 mm (1.5” exit)
High Frequency Horn: Type: Optimized Aperture Flat Front Bi-Radial
Enclosure: Flying System: S.A.F.E. - JBL Proprietary, modular, certified
Finish: Black Textured paint
Grille: 16ga. perforated steel, foam backed
Dimensions (HxWxD): 1066 x 394 x 362 mm,
(42 x 15 1/2 x 14 1/4 in)

   Array Series 4890, 4891 4890/91 Specification Sheet 


Two-way Single 355 mm (14”)
Bi-Amplified Monitors
Frequency Response: 70Hz - 18khz (+/- 3dB)
Recommended Amplifier Power: High Frequency: 300 W at 8 Ohms
Low Frequency: 600 W at 8 Ohms
Sensitivity: 98 dB (1W, 1m)
Nominal Impedance: Low Frequency: 8 Ohms
Nominal Coverage: 4890: 60 Horizontal, 40 Vertical or 40 Horizontal, 60 Vertical
4891: 60 Horizontal, 40 Vertical
Power Rating: Low Frequency Transducer:600 W AES, 50 Hz to 500 Hz 2400W peak
High Frequency Transducer: 75 W AES, 1kHz to 10kHz, 300 W peak
Nominal Diameter: Low Frequency Transducer: 355 mm (14”)
High Frequency Horn: Type: Optimized Aperture Flat Front Bi-Radial, die cast aluminium
Enclosure: Flying System: None
Finish: Black Textured paint
Grille: 16ga. perforated steel, foam backed
Dimensions (HxWxD): 4890: 376 x 686 x 376 mm, (14.8 x 27 x 14.8 in)
4891: 470 x 394 x 599 mm,
(14.8 x 27 x 14.8 in)

Array Series 4893 4893 Specification Sheet

Dual 355 mm (14”) Subwoofer

Frequency Response: 38Hz - 400Hz (+/- 3dB)
Recommended Amplifier Power: High Frequency: N/A
Low Frequency: 600 W at 8 Ohms each transducer, 1200W total
Sensitivity: 98 dB (1W, 1m)
Nominal Impedance: Two Transducers with separate pinouts, 8 Ohms each
Nominal Coverage: Array Dependent
Power Rating: 600 W AES, each transducer 50 Hz to 500 Hz, 1200W AES total system; 2400W peak each transducer, 4800W peak total system
Nominal Diameter: (Two) 355 mm (14”)
High Frequency Horn: N/A
Enclosure: Flying System: S.A.F.E. - JBL proprietary, modular, certified
Finish: Black Textured paint
Grille: 16ga. perforated steel, foam backed
Dimensions (HxWxD): 1066 xx 394 x 362 mm,
(42 x 15 1/2 x 14 1/4 in)

Copyright 2003 JBL Professional.
All rights reserved.