• Control 23:  3.5 inch, 2-way system
• Control 23T:  3.5 inch, 2-way system with 70V/100V transformer
• Control 25AV:  5.25 inch, 2-way shielded system with 70V/100V transformer
• Control 25:  5.25 inch, 2-way system
• Control 25T:  5.25 inch, 2-way system with 70V/100V transformer
• Control 28:  8 inch, 2-way system
• Control 28T-60:  8 inch, 2-way system with 70V/100V transformer
• C29AV-1: 8 inch, 2-way, high-power, wide bandwidth system
• Control 30: 10 inch, 3-way, high power, Wide Bandwidth, Outdoor Speaker
• Accessories for Surface Mount Models

Innovations That Reduce Complications

• Rugged molded high-impact polystyrene (HIPS) enclosures balance mass, strength and resonance to perfectly compliment their respective transducers.
• Symmetrical 90° horn geometry delivers precise directability and control.
• Compact design dimensions and textured, ready-to-paint exterior surfaces make the Control Contractor Series unobtrusive in any decor.
• Our (patent pending) Invisiball™ mounting system, innovative bracketing solutions, spring-loaded terminals and optional factory-installed autoformers take the headaches out of installation.
• Extensive use of high-tech materials adds years to speaker life expectancy while increasing weather resistance

• 85 Hz to 22 kHz frequency range (-10 dB)
• 50 watts continuous program power capacity
• 86 dB sensitivity (1W/1m)
• 8 ohms nominal impedance
• 3.5 kHz crossover frequency
• High-Impact Polystyrene (HIPS) enclosure
• Spring-loaded input terminals
• Dimensions (HxWxD):  193 mm x 140 mm x 111 mm (7.6 in x 5.5 in x 4.4 in)
• Net Weight:  1.8 kg (4 lb)

Control 23T
3.5 inch, 2-way System with 70V/100V Transformer
Control 23T Specification Sheet

• 100 Hz to 21 kHz frequency range (-10 dB)
• 50 watts continuous program power capacity
• 5W tap at 70V, 10W tap at 100V
• Nominal maximum output: 89 dB at 70V, 92 dB at 100V
• 3.5 kHz crossover frequency
• High-Impact Polystyrene (HIPS) enclosure
• Spring-loaded input terminals
• Dimensions (HxWxD):  193 mm x 140 mm x 111 mm (7.6 in x 5.5 in x 4.4 in)
• Net Weight:  1.8 kg (4 lb)

• 70 Hz to 23 kHz frequency range (-10 dB)
• 200 watts continuous program power capacity
• 87 dB sensitivity (1W/1m)
• 100° x 100° nominal dispersion
• 60W, 30W, 15W, 7.5W taps at 70V
• 60W, 30W, 15W taps at 100V
• 8 ohms bypass
• 3 kHz crossover frequency
• High-Impact Polystyrene (HIPS) enclosure
• Video shielded for use near video monitors
• Stainless steel grille for harsh environments
• Zinc-plated screw down input terminal strip
• Available in black or white (Control 25AV-WH)
• Dimensions (HxWxD):  236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
• Net Weight:  4.0 kg (9 lb)

• 80 Hz to 16 kHz frequency range (-10 dB)
• 150 watts continuous program power capacity
• 88 dB sensitivity (1W/1m)
• 8 ohms nominal impedance
• 3 kHz crossover frequency
• High-Impact Polystyrene (HIPS) enclosure
• Spring-loaded input terminals
• Dimensions (HxWxD):  236 mm x 188 mm x 148 mm (9.3 in x 7.4 in x 5.8 in)
• Net Weight:  2.3 kg (5 lb)

• 80 Hz to 15 kHz frequency range (-10 dB)
• 150 watts continuous program power capacity
• 30W, 15W, 7.5W, 3.7W taps at 70V
• 30W, 15W, 7.5W taps at 100V
• 3 kHz crossover frequency
• High-Impact Polystyrene (HIPS) enclosure
• Spring-loaded input terminals
• Dimensions (HxWxD):  236 mm x 188 mm x 148 mm (9.3 in x 7.4 in x 5.8 in)
• Net Weight:  3.6 kg (8 lb)

• 60 Hz to 16 kHz frequency range (-10 dB)
• 175 watts continuous program power capacity
• 92 dB sensitivity (1W/1m)
• 8 ohms nominal impedance
• 2.8 kHz crossover frequency
• High-Impact Polystyrene (HIPS) enclosure
• Spring-loaded input terminals
• Dimensions (HxWxD):  380 mm x 280 mm x 220 mm (15 in x 11 in x 8.6in)
• Net Weight:  5.5 kg (12 lb)

• 55 Hz to 15 kHz frequency range (-10 dB)
• 175 watts continuous program power capacity
• 60W, 30W, 15W, 7.5W taps at 70V
• 60W, 30W, 15W taps at 100V
• 2.8 kHz crossover frequency
• High-Impact Polystyrene (HIPS) enclosure
• Spring-loaded input terminals
• Dimensions (HxWxD):  380 mm x 280 mm x 220 mm (15 in x 11 in x 8.6in)
• Net Weight:  6.3 kg (14 lb)

• 37 Hz to 18 kHz frequency range
  (-10 dB)
• 150W pink noise, 300 watts continuous program power capacity
• 110 x 85 degree coverage with rotatable horn
• 115W, 55W, 28W at 70V/100V (plus 14W taps at 70V only)
• 8 Ohm Bypass
• Outdoor-rated screw down input terminal strip (with MTC-PC2 sealed entrance cover)
• Available in black or white (Control 29AV-WH)
• Dimensions (HxWxD): 518 mm x 305 mm x 280 mm (20.3 in x 12.0 in x 11.0 in)
• Net Weight: 12.2 kg (26.8 lb

• 38 Hz to 17 kHz frequency range
  (-10 dB)
• 250W pink noise, 500 watts continuous program power capacity
• 120 x 110 degree coverage horn
• 150W, 75W, 38W at 70V/100V (plus 19W tap at 70V only)
• 4 Ohm Bypass
• Outdoor-rated screw down input terminal strip (with MTC-PC2 sealed entrance cover)
• Available in black or white (Control 30-WH)
• Dimensions (HxWxD): 593 mm x 372 mm x 345 mm (23.3 in x 14.6 in x 13.5 in)
• Net Weight: 18.9 kg (42 lb)
  

• Control Contractor Series Bracket and Adapter Handbook, v2.0: (782kB) An overview of Control Contractor Series brackets and adapters available from JBL Professional and other sources
• MTC-xxCM: Installation instructions for the ceiling mount adapter.
• MTC-xxH: Installation instructions for the horizontal array bracket.
• MTC-xxV: Installation instructions for the vertical array bracket.
• MTC-PC2: Installation instructions for the water-tight input panel cover.
• MTC-xxSSG: Stainless steel grilles are available as a direct retrofit for all surface mount models listed above. These grilles are paintable and are available in either a silver or black finish. Best used in conjunction with the MTC-PC2 panel cover.
• Click here for Surface-Mount Subwoofers