Product Guide
Business Music
Technical Library
Installations
Software Downloads
SIA-Smaart Web Site
Pressroom
International Newsletter
Photos
Tunings
FAQ 
Search
Customer Service
Sitemap
About Us
Contact Us 
Employment
Links
 
MPC Series Amplifiers
MPC Specification Sheet
MPC Owner's Manual

The MPC Series from JBL Professional is a line of 2-channel power amplifiers specifically designed for contracting applications.  Key features include:

  mpc_amps.jpg (10748 bytes)

  • Models available with ("T" versions) and without ("non-T" versions) output transformers for driving 200V, 140V, 100V, 70V and 25V "constant voltage" systems.
  • "T" versions allow direct speaker outputs to be connected at the same time as the constant voltage outputs.  Also, one channel may utilize the direct speaker output while the other channel uses the constant voltage output.
  • Output power ratings from 225W to 600W per channel into 4 ohms.
  • Rear-mounted input attenuators to prevent unauthorized tampering.
  • Balanced input connections via Euro-style, 7-terminal detachable header.
  • Covered barrier strip output connections.
  • Dual-speed fans provide forced-air cooling with back-to-front air flow
  • UL listed and CE compliant
  • Approved by Lucasfilm for THX installations

Specification Summary
  MPC200 MPC300 MPC600 MPC200T MPC300T MPC600T
Output Power (per ch. into 4 ohms) 225 W 300 W 600 W 225 W 300 W 600 W
Output Power (per ch. into 8 ohms) 170 W 220 W 475 W 170 W 220 W 475 W
Output Power (bridged into 4 ohms) 700 W 900 W 1800 W 700 W 900 W 1800 W
Output Power (per ch. @ 100V or 70V) -- -- -- 175 W 250 W 500 W
Height (Rack Units) 2U 3U 3U 2U 3U 3U
Depth 17.9 in. 17.9 in. 17.9 in. 17.9 in. 17.9 in. 17.9 in.
Net Weight 27 lb. 42 lb. 50 lb. 37 lb. 55 lb. 67 lb.

All Models

Input Sensitivity: about 1VRMS
Distortion (SMPTE-IM): less than 0.05%
Damping Factor: greater than 200 (direct outputs)
Noise: less than 100dB below rated output (20Hz to 20kHz)
Input Impedance: 20k ohm balanced, 10k ohm unbalanced
Load Protection: Turn-on / turn-off muting, DC-fault load grounding relay (MPC300, 300T, 600, 600T) with internal fault fuses
Power Requirements: 100V, 120V, 220V or 230V AC, 50 - 60 Hz (Not user configurable)
Input Connectors: Euro-style detachable header with screw-down terminal for bare wires
Output Connectors: Covered barrier strip for bare wires or spade terminal
Cooling: Two-speed fan with back-to-front airflow
Agency Approvals: UL & cUL approved, CE compliant, and Approved by Lucasfilm for THX installations
Optional Accessories: MP-RRB1: Rear Rack Bracket for 3U (5.25 in) models (set of 2),
MP-RRB2: Rear Rack Bracket for 2U (3.5 in) models (set of 2)

Copyright 2001 JBL Professional.
All rights reserved.