Cinema Sound 5000 Series

5000 Series

Cinema Home Page	3000 Series	Screen Array Systems
Subwoofers	4000 Series	Screen Array (2-Way)
	Surround Sound

The world's first true three-way behind-the-screen cinema sound system

Digital soundtracks on today's feature films have the potential of pushing traditional two-way speaker system designs beyond their performance limits. Requirements for wide dynamic range, high power handling, and low distortion dictate the need for a new standard of performance for today's premier cinemas.

The 5000 Cinema Systems feature true three-way system design, with each section fully optimized for its specific frequency range. The 5000 Series Screen Channel systems are intended for tri-amplified use, utilizing JBL's DSC digital system controllers for crossover, signal alignment, and equalization. Factory pre-set tunings for these systems, stored in the system controller take the guesswork out of obtaining optimum performance.

Key Features:

Three-way system design for maximum output with minimum distortion
Optimized Aperture Bi-Radial® and driver technology for ultra-low distortion
Midrange pattern control for increased direct vs. reverberant energy
Vented Gap Cooled (VGC™) LF transducer(s) for maximum output and reliability
Flat-front design for easy baffle wall installation
Fully adjustable horn bracket for precise directional control

5000 Series Screen Channel Systems

5672 Screen Channel System: Designed for mid-sized theaters seating up to 500 seats
5672-BI Screen Channel System: Bi-amp version of the 5672.
5674 Screen Channel System: Intended for large theater environments seating up to 1200 seats

5672

5672 Specification Sheet

	For mid-sized (500 seats) theaters
	`Frequency Range:`	`35 Hz to 16 kHz (-10 dB)`
	`Frequency Response:`	`45 Hz to 12.5 kHz (+/- 3 dB)`
	`Horizontal Coverage Angle:`	`80°, averaged 300 Hz to 16 kHz (-6dB)`
	`Vertical Coverage Angle:`	`45°, averaged 300 Hz to 16 kHz (-6dB)`
	`Maximum Output:`	`112dB-SPL @ 10 m`
	`Recommended Crossover Frequency:`	`LF/MF: 297 Hz, MF/HF: 2.5 kHz`
	`Transducers:`
	`Low Frequency:`	`Two 2226H 380mm (15in) dia., 100mm (4in) edgewound ribbon voice coil One 4508B LF enclosure`
	`Nominal Impedance:`	`4 Ohms`
	`Input Power Rating:`	`1200W, AES; 1200W Recommended Amplifier`
	`Sensitivity:`	`103dB, 1W @ 1 m (3.3 ft)`
	`Input Connectors:`	`Barrier Strip`
	`Mid Frequency:`	`2392 midrange horn 2490H midrange driver; 100mm (4in) edgewound ribbon voice coil`
	`Nominal Impedance:`	`8 Ohms`
	`Input Power Rating:`	`200W, AES; 300W Recommended Amplifier`
	`Sensitivity:`	`115dB, 1 W @ 1 m (3.3 ft)`
	`High Frequency:`	`2352 Horn 2451 driver; 100mm (4in) edgewound ribbon voice coil`
	`Nominal Impedance:`	`8 Ohms`
	`Input Power Rating:`	`75W, AES; 200W Recommended Amplifier`
	`Sensitivity:`	`112dB, 1 W @ 1 m (3.3 ft)`
	`Mounting Accessories:`	`HF horn baffle board and mounting frame which couples MF and HF; mounts to LF enclosure for aiming/tilting`
	`Dimensions (HxWxD):`	`2786.6mm x 1118mm x 812.8mm (109in x 44in x 32in)`
	`Net Weight:`	`87.3 kg (192.5 lbs)`

5672-BI

The 5672-BI is a bi-amp version of the 5672. It includes an external passive crossover that mounts onto the woofer enclosure and provides a crossover frequency of 2.5kHz between the 2390H midrange compression driver and the 2451 high frequency compression driver. An active electronic crossover is required between the woofer and mid/high combination.

5674

5674 Specification Sheet

	For large (1,200 seats) theaters
	`Frequency Range:`	`35 Hz to 16 kHz (-10 dB)`
	`Frequency Response:`	`45 Hz to 12.5 kHz (+/- 3 dB)`
	`Horizontal Coverage Angle:`	`80°, averaged 300 Hz to 16 kHz (-6dB)`
	`Vertical Coverage Angle:`	`45°, averaged 300 Hz to 16 kHz (-6dB)`
	`Maximum Output:`	`117dB-SPL @ 10 m`
	`Recommended Crossover Frequency:`	`LF/MF: 297 Hz, MF/HF: 2.5 kHz`
	`Transducers:`
	`Low Frequency:`	`Four 2226H 380mm (15in) dia., 100mm (4in) edgewound ribbon voice coil One 5504 LF enclosure with DiamondQuad driver array`
	`Nominal Impedance:`	`Each pair in parallel; two 4 Ohm loads per driver pair`
	`Input Power Rating:`	`2400W, AES; two channels of 1200W Recommended Amplifier per driver pair`
	`Sensitivity:`	`103dB, 1W @ 1 m (3.3 ft)`
	`Input Connectors:`	`Barrier Strip`
	`Mid Frequency:`	`2392 midrange horn 2490H midrange driver; 100mm (4in) edgewound ribbon voice coil`
	`Nominal Impedance:`	`8 Ohms`
	`Input Power Rating:`	`200W, AES; 300W Recommended Amplifier`
	`Sensitivity:`	`115dB, 1 W @ 1 m (3.3 ft)`
	`High Frequency:`	`2352 Horn 2451 driver; 100mm (4in) edgewound ribbon voice coil`
	`Nominal Impedance:`	`8 Ohms`
	`Input Power Rating:`	`75W, AES; 200W Recommended Amplifier`
	`Sensitivity:`	`112dB, 1 W @ 1 m (3.3 ft)`
	`Mounting Accessories:`	`HF horn baffle board and mounting frame which couples MF and HF; mounts to LF enclosure for aiming/tilting`
	`Dimensions (HxWxD):`	`2895.6mm x 1118mm x 812.8mm (114in x 44in x 32in)`
	`Net Weight:`	`171.69 kg (378.5 lbs)`