|
EONSUB
G2 Preliminary Specifications
|
|
| Frequency Range: | (-10dB): 40 Hz - 200 Hz |
| Frequency Response: | (±3 dB): 42 Hz - 150 Hz |
| Sensitivity (1w, 1m): | 93 dB SPL |
| Rated Maximum SPL: | 117dB, @ 1m (3.3 ft) |
| Dimensions (HxWxH): |
686 mm x 430 mm x 444 mm |
| Net Weight: | 19.5 kg (43 lbs.) |
| LF Driver: |
Integral frame with one 15" (380 mm) driver, dual neodymium magnet, 2" differential drive voice coil |
| Amplifier Power: | 250 watts @ 2 ohms, no more than 0.1% THD |
| Low Pass Filter: | 125 Hz, active, 2 pole |
| Enclosure Alignment: | 6th order |
| Input Type: | Balanced Differential |
| Input Sensitivity Line: | +4dBu (nominal) |
| Speaker: | 20 volts |
| Input Impedance Line: | 16 ohms ½ |
| Speaker: | 143 ohms |
| Max Input Level Line: | +28 dB |
| Speaker: | 120 VRMS |
|
Copyright
© 2002 JBLPro.
All rights reserved. Revised: January 26, 2002 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
