|
SPECIFICATIONS
|
|
| Frequency Range | (-10 dB): 39 Hz - 18 kHz |
| Frequency Response | (±3 dB): 42 Hz - 17 kHz |
| Horizontal Coverage | (-6 dB): 90° Nominal |
| Vertical Coverage | (-6 dB): 60° Nominal |
| Rated Maximum SPL | 129 dB, @ 1 m (3.3 ft) |
| Dimensions (H x W x D) | 686 mm x 430 mm x 444 mm (27 in x 17 in x 17.5 in.) |
| Net Weight | 21 kg (46 lbs.) |
| LF Driver | Integral frame with one 15" (380 mm) driver, dual neodymium magnet, 2" differential drive voice-coil. |
| HF Driver | JBL 2418H-1 1" (throat diameter) compression driver with 1.75" diameter titanium diaphragm. Ferro-fluid cooled. |
| Amplifier Power LF | 300 watts @ low-frequency driver impedance. |
| Amplifier Power HF | 100 watts @ high-frequency driver impedance. |
| Input 1 Sensitivity | -44
dBu to -22 dBu for rated output (Mic/Line switch in MIC position). -12 dBu to +20 dBu for rated output (Mic/Line switch in LINE position). |
| Input 2 & 3 Sensitivity | -18 dBu to +20 dBu for rated output. |
| Output Level | +20 dBu (peak), Loop/Mix switch in MIX position. |
| Connectors - Input 1 - Input 2 & 3 |
XLR/F, balanced 1/4" Phone, balanced (TRS) |
| Crossover Frequency | 1.5 kHz |
| Limiting | Low frequency amplifier controlled by dynamic filter. |
| Loop/Mix Out | XLR/M, balanced |
| EQ | High Frequency Shelving, ±15 dB @ 5 kHz Low Frequency Shelving, ±15 dB @ 120 Hz |
| AC Input | 110 - 230 VAC, 50 - 60 Hz., 175 watts rating per UL, detachable IEC power cable. |
Copyright © 2001 JBLPro.
