VP7315/64DP
Powered 15 in.
3-way Integrated
Loudspeaker System


|

Powered 15 in. 3-way Integrated Loudspeaker System
The VP7315/64DP is a powered 15" 3-way integrated loudspeaker system featuring 2200 watts of peak output power, 1100 watts continuous, and onboard digital signal processing.

FEATURES
  • Powered bi-amplified full-range loudspeaker with JBL DrivePack® technology for portable or installed use.
  • 2200 Watts peak output power, 1100 Watts continuous.
  • HiQnet™ compatible; network control.
  • 15-inch Differential Drive® low-frequency driver for extended low-frequency output.
  • 60° x 40°coverage.
  • Stylized and ergonomically designed powder-coated die cast aluminum handles.
  • Six 3-inch fly track suspension points and fourteen M10 fittings (optional detachable flying fittings and forged eye bolt kits available).

SPECIFICATIONS
Frequency Range 34 Hz to 20 kHz
(-10 dB)
Frequency Response 43 Hz to 18 kHz
( ± 3 dB)
Coverage Pattern 60°x 40°
rotatable waveguide
Directivity Factor (Q) 15.85
Directivity Index (DI) 12 dB
Maximum Peak Output1 138 dB SPL 1m
Transducer Section  
Low Frequency Section JBL 2265G, 381 mm (15 in) dia.,76 mm (3 in) Dual Coil neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance 4 ohms
Mid/High Frequency Section  
Mid Frequency JBL CMCD-82H, 200mm (8in) Dual Coil Differential® transducer
High Frequency JBL2452H-SL, 100mm (4in) titanium damped diaphragm, 1.5in. exit
Waveguide JBL PT-K64-MHF
Bandpass Nominal Impedance 8 ohms
System  
DP2 Internal Amplification Output (at nominal load) 2200 Watts Peak,
1100 Watts Continuous
DP2 Output (Continuous IEC shaped pink noise into rated load impedance) 750LF/350HF Watts
DP2 Output Section 2-Channel, Class I
Audio Input connector XLR with loop-through
Signal Processing DSP Based, resident in Input Module
System Management DSP based limiters for mechanical and thermal protection
AC Power Operating Range Auto Select 90-132VAC/216-264VAC, 50/60Hz
AC Line Voltage 50/60 Hz, Auto-Detect; 120V/240V (-15%, +10%)
AC Input Connector Neutrik PowerCon
AC Loop-Thru Neutrik PowerCon
AC Current Requirement 6A per system at 120V, 3A per system at 240V
Enclosure  
Box Construction 5/8in. multi-ply exterior grade Baltic birch. Internally braced. Black DuraFlex™ finish.
Suspension System 6 standard air-cargo 3 in. track and 12 M10 fittings
Grille 14 Gauge Black powder-coated perforated steel with foam backing
Dimensions
(H x W x D)
914.4 x 528.3 x 624.8mm
(36 x 20.8 x 24.6 in)
Net Weight 44 kg (97 lb)